Yeah Racing PTFE Kugellager Set + Oil Teflondichtung Traxxas 2WD Rustler Stampede Bandit (15)

YB0248BX Yeah Racing RC PTFE Bearing Set with Bearing Oil For Traxxas Stampede VXL#3607 Rustler VXL#3707 Bandit VXL#2407

RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings.

Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance!

These high quality bearings outweigh the other low quality one:

Aircraft quality material

More durable

Higher precision

*Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)

Specification:

Telfon Bearing For Traxxas 4WD Stampede/Rustler/Bandit

Material: Metal

Include:

Bearing (15Pcs)

-YB6011B 5mm x 8mm x 2.5mm 4Pcs

-YB6014B 5mm x 11mm x 4mm 7Pcs

-YB6016B 6mm x 12mm x 4mm 2Pcs

-YB6022B 8mm x 16mm x 5mm 2Pcs

-YB6023B 10mm x 15mm x 4mm 5Pcs

-YB6026B 12mm x 18mm x 4mm 1Pc

Bearing Oil (15ml) #YA-0215

Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

High Speed Bearing Oil / Lube (YA-0215) Universal Cleaning Case (YA-0223) Aluminum Bearing Inner Size Measurer

Step 1: Cleaning

Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them.

Step 2: Shake & Soak

Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean.

Step 3: Drying

Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing.

Step 4: Re-greasing

Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up.

Bearing Testing Tool:

This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it's time to get a new one.