Serpent Cobra E-MT 4WD Truck RTR 1/8 - 6S - Monster Truck Offroad Auto

600038 Serpent Cobra EMT 4WD Monster Truck RTR 1/8 - 6S 100 Km/h

Top Monster Truck mit serienmässigem Tuning für höchste Ansprüche...

Fahrfertige RTR Version inkl. Brushless Antriebsystem, Lenkservo und Fernsteuerung

Serpent Monstertruck in Ready to Run, mit Fernsteuerung und Elektronik!

Das RTR-Paket enthält:

- Werkseitig montierte Rennfahrwerk
- Fertig lackierte Monster Truck Karosserie
- Vormontierte übergroße Reifen/Räder/Einsätze
- Voreingestellter 4S bis 6S fähiger wasserdichter 150A Regler (DragonRC)
- 1940kv bürstenloser BL-Motor (DragonRC)
- Digitaler 2.4GHz Sender (DragonRC)
- Metallgetriebe Servo 17kg (DragonRC/Savox)
- 3 Ölgefüllte Getriebedifferentiale
- Big-Bore Dämpfer und bearbeitete Aluminium-Dämpferbrücken
- Federstahl-Getriebeteile und Spannschlösser, vordere und hintere CVD- Antriebswelle
- Extra große Batteriefächer mit Klettgurten
- Gefräste Aluminium-Chassisplatte
- Vollständig kugelgelagert

Benötigt wird noch: 2x Lipo Akku 7.4V oder 11.1V mind. 4000mah 30C und Ladegerät

Serpent Sports introduce the 1/8 Monster Truck in a true Ready to Race version ! This big wheel Monster Truck can conquer any terrain with the oversized tyres. Great looks with realistic looking MT body and the large wheels / tyres. The strong and durable power system offers amazing torque and topspeed. The MT-E suspension comes from our competion range of vehicles and is made to last! Superior handling in both on and offroad use. The long big bore shocks and long durable suspensions arms eats any terrain with ease. DragonRC 2.4 GHz digital transmitter included to manage all the power !

Car
Fully expert pre assembled and pre-set chassis and electronics.

Transmitter
DragonRc 2.4 GHz steering wheel type transmitter with plenty settings and good range. Comes with small and light receiver.

Speedo
DragonRC waterproof speed controller with a massive 150A capacity to control the brushless motor and 4S or 6S battery power

Motor
DragonRC long body 1940kV brushless motor with easy color coded connectors

Body
Prepainted and pre-cut Monster Truck body.

Tyres/wheels
Premounted oversized tyres/wheels heavy duty profile for incredible grip.

Chassis
Very narrow 3mm 7075T6 aluminium chassis, with machining on the upper face to make it lighter in strategic locations and to control flex. Kick-up front for proper landings. Angled side to increase cornering clearance, and secure and easy mounting side guards with 5 screws. Countersunk holes. Overall the Monster Truck is designed to keep the weight very central and near to the centerline as possible, to create a great overall balance.




Side guards / battery trays
Durable shaped composite extra large side guards / battery trays that follow the line of the chassis, and mount with 5 screws each side. Front and sides high enough to keep the dirt out. The guards/trays create a lot of stability. The batteries are mounted in longitudinal fashion, keeping the weight very low in the car. The battery trays features easy to use Serpent marked felcron TM straps to secure the batteries in place. Fits 2S and 3S batteries.

Motormount
The motor is placed in the most optimal position in the car, keeping motor-forces and transmission parts / alignment in mind. Only one-screw is needed to secure the BL motor, in the nicely designed durable machined aluminium motormount. Space for additional motor-cooling available as needed. The space for the motor allows mounting all popular buggy and monster truck motors.

Composite chassis braces
Allows the chassis to flex which helps improve bump handling. Front and rear.

Front bumper system
The durable composite front bumper system will absorb the worst of head on crashes and will allow for save nose landings

Rear bumper
The rear bumper section is a very durable unit, easy to disassemble, and fits well with the rear of the body, to absorb the worst of back-end crashes.




Front suspension
Very long and durable composite lower wishbones, combined with upper spring-steel trackrods. 2 lower shock-mount positions. Downstops can be used as needed.

Front steering / servo saver / angled
Innovative angled front steering assembly to reduce the angle of difference between the total caster and steering plane. Therefore you will have less bump steer and a truer steering Ackerman through the entire range of suspension.

Adjustable spring loaded servo-saver system with interchangeable Ackermann plates. With the design of the steering bell cranks when changing the Ackerman you will not need to adjust your steering tie rods. Very easy to access and set-up.

The Inboard Bell crank keeps the lever and linkage inside the car. It will aid in the prevention of damage to the steering system. Zero scrub radiuses on steering knuckle, helps reduce the jacking effect created by your steering knuckle offset. It provides a more direct fell while keeping the cars chassis more level while turning.

The front roll center can be changed quickly by moving the steering knuckle shims to their appropriate locations.

Topped off with a strong composite top-plate.

Front steering-block/c-hubs
Very durable front steeringblock/c-hub assembly.




Drive-shafts
Long and lightweight spring steel units with pressed in steel pins, laser-engraved. Same length front and rear.

Wheel-axles / wheel-nut
Serpent spring steel wheel-axles with grey anodized aluminium wheel hex-adaptors and aluminium wheel-nuts to keep the massive monster truck wheels/tyres on track.

Captured universal joints
Guarantees you will finish a race without losing a pin or set screw. All parts, axles and drive train components have capture pins

Front shocktower
Light, strong and durable machined 4mm aluminium units with 3 positions for shockangle and 4 positions for the camberlink.

Shock-set front and rear
24mm big bore shocks, with hard anodized precision threaded shock-bodies. Chromed shock-shafts for supersmooth shockaction. The larger o rings provide less overall pressure and a better seal without dragging on the shock shaft.




Suspension brackets
The hinge-pins are in durable composite suspension brackets secured with c-clips.

Receiver box / servo mount / speedo mount
Composite one piece radiobox to securely mount the servo, speedo and receiver. For optimum balance the light receiver fits the top-case easy, with a small opening to allow cable to protrude. The speedo seats very low on a plate just above the chassis, so short cables can be used to the motor. The servo is mounted in a vertical fashion.

Central diff
Optimized central gear-diff with 52T super-hard spur-gear. Very small, compact design to reduce rotating mass to the max.

Transmission shafts
Durable but light and thin Serpent spring steel, laser engraved shafts.

Front and rear diff
Optimized gear-diff with superhard diff-gears. Very small, compact design to reduce rotating mass to the max same version front and rear. Diff coupler in spring steel seated in large bearings for durability.





Rear shocktower
Light, strong and durable machined 4mm aluminum unit with 3 positions for shockangle and 4 positions for the camberlink.

Rear uprights
Durable composite rear uprights with 3 camber positions

Suspension brackets rear
The hinge-pins are in durable composite suspension brackets secured with c-clips .

Bodymounts
Nylon bodymounts with wider seating for the body, securely fastened to the shocktowers.




Decals
Applied to the body.

Oils / grease
Car is assembled with high quality silicone oils for the diffs and shocks and black grease. Threadlock applied where needed.




Manual
Full color manual shows the car, specs, tips and exploded views. The transmitter and speedo have small separate manuals included.

Box
Full color protective box to re-use for car transport or tyres.




The RTR package is really dialed:
- factory assembled racing chassis
- prepainted and precut Monster Truck body
- premounted oversized tyres/wheels/inserts
- pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
- 1940kv brushless long body motor (DragonRC)
- Digital 2.4ghz transmitter (DragonRC)
- Metal gear servo 17kg ( DragonRC-Savox)
- 3 oil filled gear differentials
- Big bore shocks and machined aluminium shocktowers
- Spring steel transmission parts and turnbuckles, front and rear cvd driveshaft’s
- Extra large battery-cases with easy felcron straps
- Machined aluminium chassis plate
- Fully ballraced
- Batteries for the car and transmitter are not included

Serpent offers a wide variety of optional parts for this car to further improve performance, lighter or for even nicer looks.