Losi ON ROAD DRAG ROLLER 2WD 1:10 EP OHNE Ladegerät & Akku & Elektronik

LOS03041 Losi ON ROAD DRAG ROLLER 2WD 1:10 EP OHNE Ladegerät & Akku & Elektronik

Produkt Details
Setting the standard in the industry for years, the Losi® 22S No Prep Drag Car Roller kit lets racers create their personalized drag race car.

Key Features

• Aluminum Chassis
• Officially licensed Mickey Thompson low drag front tires and rear drag racing slicks
• All Metal Gear Transmission
• Clean wire router installation
• Precision Adjustable Wheelie Bar

 In The Box

• (1) Losi 1/10 22S 2WD No Prep Drag Car Roller
• (1) Product Manual

 Needed to Complete

• (1) 2-Channel Transmitter and Receiver
• (1) 2-3S LiPo Battery
• (1) ESC
• (1) Motor And Pinion Gear
• (1) Compatible LiPo Charger
• (1) Steering Servo
• (1) Body And Paint
• (1 Set) Assorted Tools (See Manual For Details)

The Foundation for Racing
The Mickey Thompson licensed rear tires will surely give you a great grip on the road, making sure you have the ultimate traction for the high powered brushless system that is included.


Mickey Thompson Ultra Light Front Runner Tires Mickey Thompson Ultra Light Front Runner Tires
Mickey Thompson licensed front tires will provide you with plenty of tracking while having lower drag characteristics.

 

3mm Aluminum Chassis 3mm Aluminum Chassis
The Drag Car Roller comes standard with the all new 3mm Aluminum chassis provides accurate and positive grip to the road when you are pushing the limits of power and traction. This chassis is designed with electronics protection, side impact guards, and a clean wire management system.

 

Front Bumper with Adjustable Weight Placement Front Bumper with Adjustable Weight Placement
Fine tune the weight of the front end to keep it under control and on the ground.

 

Precise Adjustable Wheelie Bar Precise Adjustable Wheelie Bar
The Drag Car Roller incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run.

 

Elastomer Battery Straps and Adjustable Battery Position Elastomer Battery Straps and Adjustable Battery Position
Fine tune the position of your battery with the addition of elastomer battery straps and make your battery changes quick and easy. No more messing with clunky hook and loop. Simply slap your battery in, pull across the strap and hook it.

 

Oil-filled Internal limited Coil-Over Spring Shocks Oil-filled Internal limited Coil-Over Spring Shocks
These shock absorbers help keep the car incredibly stable and so you can maintain total control on even the toughest drag strips. Internal limiters help eliminate body roll and keep the car planted to the track.

 

Bleeder Shock Caps Bleeder Shock Caps
Bleeder caps help you fine tune your shocks and get the perfect feel every time.

 

Fully Adjustable Turnbuckles Fully Adjustable Turnbuckles
For added adjustability and tune-ability, adjustable turnbuckles come standard.

 

All Metal Gear Transmission All Metal Gear Transmission
The Drag Car Roller comes with an all metal gear transmission for bullet-proof reliability to withstand anything you throw at it. Get your car down the lane without the fear of a broken transmission gear!

 

 
Sealed Gear Differential - 500,000k Oil Sealed Gear Differential - 500,000k Oil
The sealed gear differential comes standard with 500,000k diff oil installed allowing you to throw as much power as you want.

 
Produkt Eigenschaften

• Approximate Assembly Time 1 - 3 hours
• Body Not included
• Brakes Integral with ESC
• Scale 1/10
• Power Type Electric
• Gear Pitch 48P
• Servos Sold Separately
• Receiver Sold Separately
• Shock Type Oil-filled internal limited coil-over spring
• Front Track 9.9" (252mm)
• Vehicle Size Standard
• Product Width 10.375" (264 mm)
• Radio Sold Separately
• Vehicle Type Drag Car
• Charger Sold Separately
• Rear Track 10.0" (256.5mm)
• Speed Control Sold Separately
• Wheelbase 13.1" (333 mm)
• Ball Bearings Full set
• Chassis 3mm plate, 6061-T6 aluminum
• Completion Level Roller
• Drivetrain 2WD
• Drive Type Forward/Brake/Reverse
• Product Height 5" (127 mm)
• Battery Sold Separately
• Internal Gear Ratio 2.43:1
• Product Length 24.5" (622 mm)
• Spur Gear 84T
• Suspension Lower A-Arm, Upper Link