Castle MOTOR/REGLER 1/8 MOT. SEN. 1512-2650KV/MAMBA MONSTER X
Our Mamba Monster X ESC and 1512-2650Kv V2 are paired together and perform incredibly in 1/8th buggies and on-road cars weighing up to 9lbs and up to 4s LiPo. You will have all the power your 1:8th scale vehicle demands with the smoother throttle control of a sensored motor. Mamba Monster X takes Castle’s legendary “monster” performance to a whole new level.
New 1512-2650Kv V2 motor now included! Our commitment to excellence drives us to refine the user experience,optimize performance, and ensure that every aspect of our products are meticulously designed to provide the utmost satisfaction. Let's face it,even the best products have room for refinement, which is why we are excited to introduce the newly redesigned 1512-2650Kv V2, a new spin on one of the most popular motors we've ever produced! The transformation has included several improvements, most contributed by new stator and rotor assembly upgrades that, in turn, allow for even HIGHER EFFICIENCY, REDUCED TEMPERATURES, AND SMOOTHER START-UPS!
MAMBA MONSTER X FEATURES:
- Input Voltage Range : 2s-6s LiPo (ESC Only) (4s LiPo Max with included 1512-2650kv V2 motor)
SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes
- Selectable 5.5V, 6V, 7.5V, 8V (8A peak) internal BEC (Battery Eliminator Circuit)
- Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.
- ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer.
- Removable 30mm fan
- Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters
- DATA LOGGING to capture and record performance data from your vehicle
- AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff.
1512-2650 V2 MOTOR FEATURES:
- Input Voltage range: 2s-4s LiPo
- Redesigned stator and rotor assemblies to improve magnetic flux.
- Reduced magnetic cogging, producing less residual drag brake.
- Increased efficiency, resulting in lower temperatures and longer run times.
- Smoother start-up, reducing cogging or stuttering when starting from a stop.
- Rebuildable design allows replacement of front end bell/bearing assembly or rotor/shaft assembly. (see note above)
- High-Strength Kevlar Wrap and 180C Grade Neodymium Sintered Magnets
| Technical Specs |
| Electronic Speed Controller: |
| Input Voltage Range: |
MIN: 2S LiPo
MAX: 6S LiPo (4s max with included 1512-2650kv V2 motor)
|
| BEC Specifications: |
Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V |
| Operating Environment: |
Waterproof* design allows for use in nearly any environment. |
| Brake: |
Proportional |
| Reversible: |
Yes, but may be disabled for racing. |
| On/Off Switch: |
Yes |
| Cooling Fan: |
Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) |
| Size: |
Length: 2.09" (53mm)
Width: 1.93" (49mm)
Height: 1.44" (36.4mm) |
| Weight (with no battery connector): |
3.92 oz. (111.g) |
| Connectors: |
6.5mm female bullets for motor connection.
|
| Items Needed for Operation: |
Battery Connector required, 6.5mm Castle Connectors are recommended. |
| Product Use Statements: |
*Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
| Application Guidelines: |
Intended for up to 4S (25.2 Volt) operation in vehicles weighing less than 9 lbs, with batteries, ready-to-run. |
| Recommended Motors: |
Combo includes Castle sensored 1512-2650Kv: Max Cells: 4s
|
| Max. Recommended Vehicle Weight: |
Less than 9 lbs, with batteries, ready-to-run with included 1512-2650Kv motor.
|
| Programmability: |
Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software, or the Castle Link iOS App and a B-Link Bluetooth Adapter (sold separately).
|
| Telemetry Link Capable: |
Requires purchase of Futaba S.BUS™ Telemetry Link. S.BUS2™ extends Futaba S.BUS™ and supports bidirectional communication. Compatible radios will support S.BUS2 protocol. It is also necessary to utilize a compatible Futaba® Telemetry Receiver. Click here to view the Futaba® Radio Compatibility Chart.
|
| Tech Notes: |
- Mamba Monster X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
- Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
- Applying voltages higher than 25.2V will cause irreparable damage to ESC.
- We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our CCBULLET 6.5mm, Castle 6.5mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs
|
| Motor: |
| Input Voltage Range: |
2-4S LiPo |
| Kv: |
2650 |
| Max. RPM: |
60,000 |
| Size: |
Length: 67.7mm
Diameter: 40mm (41.4mm with fins) |
| Weight (w/wires): |
383g (13.6oz); 334g without wires.
|
| Shaft Size: |
Length: 20mm
Diameter: 5mm |
| Mounting Hole Specifications: |
M3 and M4 @ 25mm |
| Cooling Fan: |
011-0139-00
|
| Connectors: |
6.5mm male Castle Bullet Connectors, includes 210mm length sensor wire.
|
| Application Guidelines: |
Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs and up to a 4s LiPo.
|
| Max. Recommended Vehicle Weight: |
See application guidelines
|
| Tech Notes: |
Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
The 011-0131-00 Rotor Replacement is NOT compatible with the V2 motor. A new rotor replacement will be available in the future. Check back here for updates.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
|
|
|
|
