CRAWLER PARK STARTER KIT TEPPICH PISTE 1/24 - 1/18 200x100CM

CRAWLER PARK 1/24 STARTER KIT CARPET CIRCUIT RC CRAWLER PARK

Welcome to the first off-road 4x4 remote controlled cars circuit RC crawler. We invite you to join us and discover the addictive 4x4 Off-Road miniature world, a small-scale experience with “real-scale” sensations, and the most incredible, without having to leave home, in your room, living room or garage, at any time and only in a few minutes you will be able to design your circuit and then enjoy your RC Unlimited crawler.

We present the first crawler park kit with a carpet base that gives you off-road scale realism that you do not have at home, you will drive along the paths with a stone, mud, sand and grass effect while you climb the 4 spectacular obstacles of different levels of difficulty with a surprising realism 1/18 scale.

You will enjoy assembling the obstacles made of 100% high-quality wood, from the beginning. You will receive a board with the pre-cut pieces, and you will only have to press slightly to remove them and carry on with the easy 3D assembly pieces, it’s not necessary to use adhesives or glues. Check the assembly instructions by scanning the QR code printed on the board.

So that the obstacles do not move when driving through them, remember to put the bases that have the sharp pieces that are fixed to the carpet.

Discover the infinite distributions of obstacles to design your circuits to overcome your own challenges and beat your opponents by making the best times.

Remember that the carpet paths are designed to set up your crawler challenge, parallel races in a challenge mode with two or more cars with identical obstacles for each driver.

Surprise! You can join more identical carpets since we have designed the joints so that the paths coincide and you can expand your circuit without limit. For example, with 3 carpets you will have a 4 square meter circuit, with a rectangular format of 82x79in or a long format of 28x237in, perfect for crawler challenge races.

There is no limit in your crawler park!

What happens when we push an Off-Road car to the limit?

Improve your 4x4 skills with your Crawler Park models. The surprising realism when driving through our Crawler Park challenges you to overcome and balance testing climbs, side steps, dizzying descents, play with the inertia of the car, the traction and the direction of the steering wheel, learning how to regulate the amount of acceleration, and when to brake so as not to overturn the car.

Crawler Park is designed for all levels, 100% scalable and customizable for all tastes, configuring your circuit or track without limits, changing challenges as many times as you want. Each of our obstacles includes three fixation formats so that it doesn’t slip when running through them, a base with rotating keys for our puzzle-style paths, another with sharp pieces for the printed carpet, and finally a few holes for screwing on the desired surface.

Remember! Get to the next level of the game by tilting and adding new inclinations to the surface of the obstacles to further complicate the challenge.
What's Included

Seesaw Obstacle

Ready for balances? Well, the seesaw is the king, overcome this obstacle trying to get all four wheels to pass over the two gangways without any wheel falling off and without the car overturning when going down.

This obstacle has two anchors for tilting gangways, a lower one for the more cautious and the higher one for the more experienced radicals. Carefully opening the chassis, itself, you can change the anchor without having to disassemble any part of the obstacle.

Axes Crossing Obstacle

A classic of 4x4 obstacles, the axes crossing challenges you to overcome the parallel trunks without the wheels leaving them. Get ready to turn at the exact moment to go straight while you have fun pushing your car's suspension travel to the limit.

Stage 1 Obstacle

Attention Not For Beginners! We present Stage 1, of Expert difficulty level, it is one of the obstacles with a more elaborate design so that your mini off-road experience is a real challenge. Before starting the climb through the logs you will have to study the line, if not the dump is assured.

Important! This peculiar Crawler Park obstacle is removable to increase the level of difficulty, by turning the modules you will be able to have 4 tracks, each one requires its own technique to reach the end with all four wheels touching the ground, in the photos of the product we show it to you.

Be careful, the line is important but the level of acceleration is the secret to leaving with a smile on your face.

Double Face Obstacle

Designed for all cars, both standard and evolved, it is you who sets the limits according to the line you dare to do. But where is the limit of your car? The double lateral will help you to know the limits of your car while you enjoy the suspension travel and vertigo wheel lifts, prepare for surprise dumps.

What suspension travel does your car have?

Carpet Circuit

This carpet gives you the realism off-road scale that you don't have at home, drive on the roads with stone, mud, sand and grass effect while climbing the Crawler park obstacles. Discover the infinite distributions of obstacles to design your circuits to overcome your own challenges and beat your opponents by making the best times. The carpet circuit mesure is 79x28 in.

The Crawler Park models are aimed both to modeling and RC crawler hobby lovers who give importance to scale realism, such as 4x4 car lovers who want to play with friends and family.

Who will reach the finish line first without overturning the car?

Attention! Be careful with your hands during the process of removing the pre-cut pieces from the wooden board, sharp parts may be exposed.

Our product range doesn’t include cars.
Suitable for 1/24 and 1/18 scale cars, check measurements in the characteristics table.
Each obstacle adds a duplication of the most delicate pieces for its replacement.
Our range of products has been approved and certified in compliance with all safety measures, risk assessment and environmentally friendly recycling criteria.
Product recommended for people over 14 years old.

FEATURES
Suitable for 1/24 scale cars.
Each obstacle adds a duplication of the most delicate pieces for its replacement.
Our range of products has been approved and certified in compliance with all safety measures, risk assessment and environmentally friendly recycling criteria.
Product recommended for people over 14 years old.
SPECIFICATIONS
Scale: 1/24 scale
Difficulty level: 1 BEGINNER
Suitable for cars with a maximum width: 5in / 130mm

WHAT'S INCLUDED
1 x Seesaw obstacle for 1/24 RC Crawler park circuit
1 x Axes Crossing obstacle for 1/24 RC Crawler park circuit
1 x Stage 1 obstacle for 1/24 RC Crawler park circuit
1 x Double-face obstacle for 1/24 RC Crawler park circuit
1 x Carpet circuit of 200x100cm for 1/24 RC Crawler park circuit