CRAWLER PARK SEESAW OBSTACLE HINDERNISS 1/24 - 1/18 SCALE CRAWLER

CRAWLER PARK SEESAW OBSTACLE 1/24 RC CRAWLER PARK CIRCUIT

Ready for balances? Well, the seesaw is the king, overcome this obstacle trying to get all four wheels to pass over the two gangways without any wheel falling off and without the car overturning when going down.

This obstacle has two anchors for tilting gangways, a lower one for the more cautious and the higher one for the more experienced radicals. Carefully opening the chassis, itself, you can change the anchor without having to disassemble any part of the obstacle.

You will enjoy assembling the obstacles made of 100% high-quality wood, from the beginning. You will receive a board with the pre-cut pieces, and you will only have to press slightly to remove them and carry on with the easy 3D assembly pieces, it’s not necessary to use adhesives or glues. Check the assembly instructions by scanning the QR code printed on the board.

This obstacle is designed to be fixed both on our puzzle-style paths by placing the obstacle in the anchor points and turning the keys of the obstacle to attach it, on top of our printed carpet or by screwing it on the desired surface.

What happens when we push an Off-Road car to the limit?

Improve your 4x4 skills with your Crawler Park models. The surprising realism when driving through our Crawler Park challenges you to overcome and balance testing climbs, side steps, dizzying descents, play with the inertia of the car, the traction and the direction of the steering wheel, learning how to regulate the amount of acceleration, and when to brake so as not to overturn the car.

Crawler Park is designed for all levels, 100% scalable and customizable for all tastes, configuring your circuit or track without limits, changing challenges as many times as you want. Each of our obstacles includes three fixation formats so that it doesn’t slip when running through them, a base with rotating keys for our puzzle-style paths, another with sharp pieces for the printed carpet, and finally a few holes for screwing on the desired surface.

With this obstacle we invite you to discover the addictive world of the 4x4 Off-Road in miniature, a small-scale experience with "real-scale" sensations, and the most incredible without leaving home, in your room, living room or garage, at any time and in a few minutes you will design your circuit and enjoy your RC Crawler without limits.

Get to the next level of the game by tilting and adding new inclinations to the surface of the obstacles to further complicate the challenge.

The Crawler Park models are aimed both to modeling and RC CRAWLER hobby lovers who give importance to scale realism, such as 4x4 car lovers who want to play with friends and family.

Please Note: Be careful with your hands during the process of removing the pre-cut pieces from the wooden board, sharp parts may be exposed.

Please Note: Our product range doesn’t include cars.
Features

Suitable for 1/24 scale cars.
Each obstacle adds a duplication of the most delicate pieces for its replacement.
Our range of products has been approved and certified in compliance with all safety measures, risk assessment and environmentally friendly recycling criteria.
Product recommended for people over 14 years old.

Specifications

Scale: 1/24 scale
Difficulty level: 1 BEGINNER
Suitable for cars with a maximum width: 5in / 130mm