106628 FLUX VEKTOR 4800Kv BRUSHLESS MOTOR

106628 FLUX VEKTOR 4800Kv BRUSHLESS MOTOR

4800 U/min pro Volt. Mit Flux Vapor Brushless Regler verwenden.

Upgrade to a zero-maintenance brushless Flux Vektor 4800Kv motor for the ultimate in performance and ease of use! The Flux Vektor 4800Kv brushless motor is standard equipment in the updated E-Firestorm Flux kits, making it the perfect partner for any off-road vehicle or touring car for fun running. It can handle 7.4 volt (2S) or 11.1 (3S) LiPo batteries as well as 7.2v NiMH batteries for a range of possibilities! It's also fitted with brass bullet connectors that allow it to plug directly into the Flux Vapor speed controller for total ease of use and a simple package upgrade for any car or truck fitted with a brushed motor system. FEATURES:

High torque/high temperature neodymium magnet

Oversized precision sealed bearings

3.2mm 1/8" hardened steel shaft

4 Pole rotor for more torque

Triple insulated windings for long life

Black anodized case

Easy to Install

Compatible with any sensorless ESC

Use with the #106627 Flux Vapor or #106767 Flux Vapor Pro waterproof ESC for best performance

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.