Bis 16 Uhr bestellt, Morgen geliefert*
Kostenloser Versand ab Fr. 150.-
Top Service
071 535 00 63 - Montag / Mittwoch / Freitag 10-12 Uhr / 15-17 Uhr
 

73732 RPM Querlenker vorne Associated B4

73732 RPM Querlenker vorne Associated B4
CHF 19.90

inkl. MwSt. zzgl. Versandkosten

Exakter Lagerstatus wird ermittelt

  • 99200956
  • RPM73732-(RP)
  • Bis 16 Uhr bestellt, Morgen Geliefert!
  • 30 Jahre RC Modellbau Erfahrung
  • Mehr als 900 Hersteller - 200`000 Artikel
73732 RPM Racing Products Tuning Parts Team Associated B4, B4.1 & B4.2 Front A-arms & Bulkhead... mehr
Produktinformationen "73732 RPM Querlenker vorne Associated B4"
73732 RPM Racing Products Tuning Parts Team Associated B4, B4.1 & B4.2 Front A-arms & Bulkhead

Unser Tuning Tipp: RPM Teile sind aus nahezu unzerbrechlichem Nylon Kunstsoff für ungetrübten Fahrspass und ersetzen 1:1 das Originalteil

RPM A-arms for the Associated B4, B4.1 & B4.2 were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. Our B4 front A-arms are designed to withstand some serious abuse! We’ve redesigned the entire front end, replacing the stock front bulkhead with a version that helps spread impact forces over a larger area at the inner hinge pin mounts. RPM front A-arms are wider at the inner hinge pin by nearly 3/16” without altering suspension geometry.

We also focused on the hinge pin retaining system used on the stock A-arms. Using a small screw hole so close to the hinge pin like the stock arms do creates structural weaknesses. We moved the hinge pin retaining screws in-line with the hinge pins, significantly strengthening our A-arms in the process. By eliminating the smaller 2-56 hinge pin retaining screws, we’ve also eliminated the problem of the hinge pins falling out due to varying screw head diameters.

Our final focus was on slop elimination. Our strict quality control allows us to tighten up all of our tolerances without fear of binding the suspension system. The final result: a smooth, free moving suspension system with minimal slop. Our tighter tolerances on our A-arms allows other critical adjustments such as camber and toe angles to be much more consistent, which provides better and more consistent control of the B4.

RPM B4 A-arms come with all necessary mounting hardware and instructions. RPM B4 A-arms are sold in pairs and include the front bulkhead.

Tech Notes: RPM B4 Front A-arms require the use of the bulkhead we supply in the kit. Stock or any other aftermarket bulkheads will not work with RPM A-arms.
Kundenbewertungen für "73732 RPM Querlenker vorne Associated B4"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzinformationen gelesen.

Zuletzt angesehen
FAQ - Fragen / Antworten 0
Fragen / Antworten zum Artikel..... mehr

Frage zu diesem Artikel?

Mit * gekennzeichnete Felder sind Pflichtfelder.

Beantwortete Fragen

Keine Fragen vorhanden
Frage zum Artikel