Aucun avis trouvé
INFERNO NEO 3.0VE T1 RTR EP (KT231P+) Rot
Bestseller
- Commandé avant 16h, livré demain ! (articles en stock)
- 30 ans d'expérience en modélisme RC
- Service de qualité par des professionnels du modélisme
- Plus de 500 fabricants - 200 000 articles
Veuillez vous connecter afin que nous puissions vous informer d'une réponse
34108T2B KYOSHO INFERNO NEO 3.0VE T1 READYSET EP (KT231P+) Rot - 4S ohne Akkus und Ladegerät
Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !
Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE allows anyone to test the bounds of common sense with powerful brushless motor acceleration.
*Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
*Full-time 4WD with low C of G 3-diff shaft drive.
*Big Bore oil shocks & 4-wheel independent double wishbone suspension.
*Full bearing specifications with 18 ball bearings on drive system and suspension.
*Features thick suspension arms with high torsional rigidity.
*Wide variety of optional parts is available to upgrade the chassis.
*Equipped with 1.0 module metal main gear, designed for hard running.
*Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
*Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.
Kit Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5、2.0、2.5、3.0mm L shaped hex wrenches
Cross wrench
17mm wheel wrench
Required for operation
4 x AA alkaline batteries for transmitter
Traveling battery
Charger
Stabilized power supply
Phillips screwdriver (large, small)
Technical data
Length 469mm
Width 307mm
Height 189mm
Wheelbase 323～328mm
Tread (F/R) 258mm／261mm
Tire (F/R) φ115×44mm／φ115×44mm
Gear Ratio 12.7：1
Weight 3,550g (approx.)
Transmitter 2.4GHz Syncro KT-231P+
Fabricant:
Kyosho
Fahrzeuge (Alle Attribute)
Surface d'entraînement:
- Offroad / Gelände
Type de commande:
- 4WD
Garde au sol mm env.:
- 30
Flugzeuge
Niveau d'achèvement:
- RTR ohne Akku - Ladegerät
Boote
Recommandation d'âge (Planet-rc):
- ab 12 Jahren
Type de batterie recommandé:
- Lipo oder NimH Akku
Akku
Niveau de compétence:
- Fortgeschrittene
Largeur mm env.:
- 307
Hauteur mm env.:
- 189
Poids g env.:
- 3550
Fahrtenregler
Tension de fonctionnement max.:
- 14.8 Volt
Motoren Elektro
Type d'entraînement de moteur:
- Elektro Brushless (Bürstenloser Motor)
Éclairage LED:
Nein
Empattement mm env.:
- 325
Brushless Set
Vitesse km / h env.:
- 80
Reifen
Diamètre de roue mm env.:
- 120
Taille de jante pouces:
- 3.3 " (84 mm)
Felgen
Couleur:
- Rot
Karosserien
Echelle de taille:
- 1/8
Type de véhicule:
- Buggy Offroad
Support de roue / conducteur:
- 17 mm
Servohörner
Longueur mm env.:
- 469
Akkustecker
Bouchon:
- T-Plug / Typ Dean`s
Werkzeug
Imperméable:
Nein
Zum Betrieb dieses Modells wird folgendes Zubehör benötigt:
- Motivierter Fahrer der Spass am Schrauben hat ✌
- 4 AA Batterien oder Akkus für die Fernsteuerung
- Fahrakku LiPo oder NiMh
- passendes Ladegerät
- Geeignetes Werkzeug
Ausser dem Fahrer ✌ findest Du alles unter Zubehör / Tuning und Top Zubehör
Chargement...
Chargement...