81112 RPM Querlenker hinten Associated B6 B6D

81112 RPM Racing Products Tuning Parts Rear A-arms for the Associated B6 & B6D

Unser Tuning Tipp: RPM Teile sind aus nahezu unzerbrechlichem Nylon Kunstsoff für ungetrübten Fahrspass und ersetzen 1:1 das Originalteil 91695

– significant improvement in hinge pin slop reduction

– 4.75g per arm lighter than stock

– replaces stock Associated 91695

– sold in pairs

RPM Rear A-arms for the Associated B6 & B6D are designed with the same principles as our Flat Front A-arms (RPM 81372) & Gull Wing Front A-arms (RPM 81422). With stock A-arms, the amount of slop at the hinge-pins can cause your suspension settings to wander (we found as much as 0.003” or .076mm of clearance in the hinge pin holes of a stock set of new A-arms). RPM hinge-pin holes are held to strict tolerances, with no more than 0.0005” to 0.001” (.013 to .025mm) of clearance, an improvement of nearly 300% over stock!

How about weight reduction? RPM B6 / B6D A-arms are 4.75 grams per A-arm* lighter than stock! That’s a weight savings of 9.5g in total (almost 1/3 of an ounce)! If your B6 is already underweight, a weight savings at the A-arms means you can add more weight where it’s needed elsewhere, providing additional tuning options and ultimately, a faster racing machine.

RPM arms are some of the toughest in the industry so a rough landing or an extreme hit from an out-of-control competitor won’t take you out of the race! With unmatched performance, extremely lightweight materials and the ability to hold your suspension settings crash after crash, RPM A-arms will get you across the finish line EVERY time!

Tech Notes: RPM 81112 Rear A-arms replace stock Associated 91695.