80182 RPM Querlenker Hinten oder Vorne Schwarz (2) Traxxas Bigfoot Rustler Slash 4x4 Stampede 4x4 Stampede 2WD

80182 RPM Racing Products Tuning Parts Traxxas Electric Stampede 2wd & Electric Rustler Rear A-arms Black

Unser Tuning Tipp: RPM Teile sind aus nahezu unzerbrechlichem Nylon Kunstsoff für ungetrübten Fahrspass und ersetzen 1:1 das Originalteil

– fits 2wd versions of the electric Stampede & Rustler

– each A-arm is 7 grams lighter than stock!

– eliminates over 0.03” (0.8mm) of slop from the inner arm mount

– replaces stock Traxxas 3655 & 3655X

RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.

RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.