6308-31 ProLine Pro-Spec Dämpfer hinten vormontier

6308-31 Pro-Line Pre-Assembled Pro-Spec Shocks (Rear) for Short Course Rear 100mm / 62.5mm

passen für:

Short Course Trucks and other 1:10 scale vehicles

Stampede 2wd Rear

Stampede 4x4 Rear

Rustler Electric Rear

Pro-Line PRO-2 SC Buggy

Hot Bodies D413 1:10 4WD Buggy *Use 6267-01 in the Front with 5mm of limiters and use 6308-01 or 6308-31 in the Rear. Use 2mm spacers on the top of the shocks to get the correct shock angle.

TLR 22-4 1:10 4WD Buggy *Use 6308-01 or 6308-31shocks in the Rear with 2mm of limiters to get stock rear shock lengths and use stock 22-4 shock balls in the Rear Shocks

Traxxas® Bandit® Rear *Mount to A-arm inner-most location

This is a pair of Pro-Line Rear Pro-Spec Shocks (Pre-Assembled). The next generation of Pro-Line Shock Technology has arrived: Pro-Line Pro-Spec Shocks! Now available Pre-Assembled, just fill with your choice of shock oil (not included). Every last detail has been refined to give you the best performing and best looking Shocks ever made. The Pro-Spec Shocks are a 12mm Big Bore design with a Single Low Friction X-Ring Seal. The Pistons and Shaft Guides are made from Silky Smooth White Delrin for Low Stiction and the 3.5mm thick Shock Shaft is Hard Chrome Coated, just like full scale racing shocks.

The Pro-Spec Shocks feature an easy access Bleeder Cap Screw for consistent shock builds every time. Each pair of Pro-Spec Shocks includes 3 different piston options (1.4, 1.6 & 1.8) and a blank piston for drilling to a custom size. Custom Shock Tightening Tools and optional shock limiters are also included. Optional Pro-Spec Springs are available separately. Upper and lower shock pivot balls are included so you can fit a wider range of vehicles right out of the box.

Smoothest Shocks Pro-Line has ever made

Pre-Assembled, Just Fill and Go

12mm Big Bore Technology

Single Low Friction X-Ring Seal

Silky Smooth White Delrin Shaft Guides and Pistons

Optional Pistons and Limiters Included

Easy Access Bleeder Cap Screw

Hard Chrome Coated 3.5mm Shock Shaft

Optional Spring Rates available separately

Will work with Hardware kit (6063-05)

Also available in a kit form (6308-01)

Pro-Spec 6308-30 Front also available